Suggested LED Boat Light Kit Install

1. Install 8 AA batteries into the holder.
2. Place the boat in slings.
3. The included velcro can be used to mount the power pack (we suggest inside the boat under the rigger or behind the foot stretcher).
4. The port and starboard LED strips should face bow and slightly overlap the side of the rigger such that it can be seen from the front and side (but not from the stern).
5. The port (red) and starboard (green) strips are mounted on the appropriate rigger sides with the included zip ties.
6. The white strip can be installed in the center on the rigger or the splash guard facing up (or the sky) depending on your boat.
7. As an option the blue LED strip is for use inside the boat if needed.

Additional accessories such as extension cable, colors and additional LED strips are available, select when ordering.

• Strips can also be attached to a card (not included) to be put in the bow card slot.

**Before installing, ensure to check local, state and federal laws regarding boating at night in your area and the requirements. This product is intended for personal use and is not certified for or intended to meet any state or federal navigational requirements. Seller and manufacturer are not responsible for any damages resulting from improper installation or use of this product. Night time rowing can be dangerous, use at your own risk.**